Hints and tips — Instructions
Building the 1/24th toilet roll holder
Here's a quick photo guide to building the toilet roll and holder kit in 1/24th scale. You will need: snips or side cutters acrylic paints superglue Separately paint the pieces, without removing from the supports. Remove the support parts, cutting flat and as close to the piece as you can. Put a tiny dab of superglue on the flat back of the roll, where the supports were. Fit the pieces snugly together. Done! Ready to attach to your bathroom wall. If you'd like to buy this kit - or a finished, painted piece - they are available from my shop...
Building the 1/24th scale Toilet Brush
Here's a quick photo run through of how to put the 1/24th scale toilet brush model together.
Building the Low Cistern Toilet kit
1/24th scale 1/48th scale Instructions
Hello! I'm going to take you step by step through building our Low Cistern Toilet kit. I'm using the 1/24th scale version in these photos. The 1/48th model follows the same steps without the separate handle.